Why does my treadmill belt keep moving to one side?
On almost all treadmills, including machines from Horizon, ProForm and Smooth Fitness, you can re-center the belt by tightening the roller bolt on the side the belt is slipping toward, or loosening the roller bolt on the side the belt is sliding away from.
Why is my treadmill belt not centered?
Things people try are lubricating the belt, tightening, messing with the adjustment bolts at the rear of the machine, or loosening the running belt. There are three major reasons why a treadmill belt won’t stay centered. … Unplug the machine and turn the walking belt by hand to the seam of the belt.
How do I stop my treadmill belt from moving to one side?
If the Running Belt moves to the left, turn the adjusting bolts on the left side 1/4 of a turn clockwise, then turn the right adjustment bolt 1/4 turn counter-clockwise. If the belt does not move, repeat this step until it centers.
How do I know if my treadmill belt is to tight?
There is a conclusive way to see if your treadmill walking belt is too loose or too tight. On the side of the machine, lift up the walking belt as far as you can from the middle of the deck. It should lift up three or four inches. If it lifts up higher than this, it’s too loose.
When should I replace my treadmill belt?
You should check your belt for signs of wear at least once every three months. To check for wear, run your hand along the belt’s underside. If the belt feels worn and rough, you may need to replace it with a new one.
How do you clean a treadmill belt?
How to Clean a Treadmill Belt
- Unplug the unit from the electrical source before you begin.
- Remove any accumulated dust from the belt, using an anti-static duster. …
- Wipe down the belt, using a slightly dampened cloth and taking care not to drip any water onto the belt.